Linear Recessed Lighting

While these terms are often used interchangeably, they may refer to different products.

• Recessed linear LED lights are fixtures installed into a ceiling or wall to create a seamless line of light for ambient illumination, wall washing or architectural accents.
• Strip lights can refer to linear products in general, or specifically to flexible light strips that bend horizontally or vertically to trace architectural features, ranging from architectural light strips to LED tape lights.
• Channel lights typically combine LED tape with a profile and diffuser. The profile may be surface-mounted or recessed.

• Choose trimless or mud-in profiles when the design calls for a borderless aperture that reads as part of the finished surface. These flangeless installations show a line of light without a visible trim border.
• Flanged fixtures create a visible edge around the opening and may better suit ceiling conditions that need a defined transition. Custom RAL finishes are available to align with brand colors or a specific design aesthetic.
• Regressed fixtures place the luminous surface above the ceiling plane for a quieter appearance and reduced perceived brightness.

Yes. Most models in our linear recessed collection allow you to connect multiple fixtures to form continuous runs of light across ceilings or walls. Select models, such as the Continuum 12100 Series, tandem-mount for seamless lines of light. Maximum run length, feed locations, driver capacity, and available connectors vary by system, so confirm the complete configuration before specification. Our project services team can help you plan a run configuration.

Yes, select systems, including our Continuum collection, allow for ceiling-to-wall connections and custom geometric designs with seamless ceiling-to-wall transitions, illuminated corners, custom angle joints or field-miterable profiles for lines, grids, and other geometric compositions. Confirm compatible connectors, allowable angles, feed locations, and control zones before the layout is finalized.

• Use direct distributions for ambient or task illumination
• Wall-wash optics to reveal art, displays, and material texture
• Perimeter distributions to brighten vertical planes at the room edge

Review photometric data and spacing criteria to confirm that the selected distribution produces the intended balance of horizontal and vertical illumination.

Wall-wash lighting directs light across a vertical surface to provide broad, even illumination. Recessed linear wall-wash fixtures direct light onto an adjacent wall to illuminate art, displays, signage, and architectural finishes. The fixture’s setback from the wall, spacing and light distribution affect coverage and uniformity. Photometric data can help you establish the appropriate layout. Contact us if you need photometrics or lighting layout assistance.

Alcon Lighting offers apertures from one to six inches. Narrow apertures can create a restrained graphic line, while wider four- and six-inch profiles have greater visual presence and can support higher-output applications. Make sure to consider aperture, output, ceiling height, run length and surrounding architectural proportions together rather than selecting by width alone.

Our project services team can provide support with fixture selection, specification guidance and photometrics.

We provide linear recessed fixture output in lumens per foot, making it easier to compare performance across different profiles and run lengths. Our collection ranges from 160 lm/ft for ambient lighting up to 1750 lm/ft. The appropriate output depends on the application, ceiling height, fixture spacing, light distribution, surface reflectance and target light levels. Our project services team can assist with product selection, photometric calculations and lighting layouts to help determine the output needed for the intended visual effect and performance requirements.

Coordinate output, lens treatment, mounting height and dimming with the way occupants will view the line of light. Regressed profiles can reduce the apparent brightness of the luminous surface, while wall-wash optics can shift emphasis away from the aperture and onto an illuminated vertical plane. Use IES or photometric data to review illuminance and uniformity before final selection.

• Static white configurations span 2700K to 5000K, with 0-10V, TRIAC, ELV and MLV dimming drivers available
• Select fixtures feature tunable white controls to support circadian-informed design strategies
• RGB+W color control offers vibrant color options and programmable scenes controlled by RF remote, Wi-Fi-connected mobile applications, Bluetooth Mesh or DMX 

Confirm the control protocol and required drivers early in coordination.

Most fixtures in this collection are intended for hard-ceiling installations. Select models accommodate T-bar or screw-slot ceilings, while shallow trimless profiles address interiors with limited depth beyond the drywall. Coordinate the cutout, housing depth, mounting hardware, driver location and service access with the reflected ceiling plan.

Select wet-location and IP-rated recessed linear fixtures can extend the design language to approved exterior ceilings, recessed millwork and other moisture-exposed conditions. Wet-location capability is model-specific, so verify the rating, installation orientation and environmental requirements on the current specification sheet.

Depending on the product, designers can specify length, aperture, trim finish, custom RAL finish, lumen package, color temperature, CRI, dimming and control options. Select systems also support corner conditions, ceiling-to-wall transitions, sensors or emergency configurations. Confirm model-specific options before the fixture schedule and ceiling details are issued.

Yes. Select linear recessed fixtures are Made in USA, Buy American Act (BAA)-compliant or Build America, Buy America (BABA)-compliant to support applicable government, institutional, infrastructure and publicly funded project requirements. Availability varies by model, so confirm the required designation and supporting documentation during specification.

Select linear recessed fixtures offer Title 24 and Title 24 JA8 compliance options, along with compatibility for occupancy and daylight sensors, and other control strategies. Available lumen packages and dimming capabilities allow designers to coordinate lighting output with project energy targets, space use and applicable code requirements. Confirm certifications and control compatibility for each model during specification.

Available product documentation may include spec sheets, installation instructions, IES files, photometric data and BIM/Revit files. Alcon can also assist with fixture selection, technical coordination, lighting layouts and submittal documentation to support the project from design development through installation. Documentation varies by model, so confirm required files and certifications during specification.