Continuum™ Linear LED Lighting | Length: 2FT; Mount Type: Wall; Technology: Lutron Vive; Features: Occupancy Sensor, Daylight Sensor

Continuum™ Linear LED Lighting
Alcon Lighting Store Alcon Lighting +1 (310) 733-1248 customer service +1 (877) 733-5236 customer service
US Los Angeles 2845 S. Robertson Blvd. CA 90034
[email protected]
2 Results
Additional options
  1. Emergency Battery
  2. ELV Dimming
  3. 0-10V Dimming
  4. QuickShip™
  1. On Sale
  1. Linear (2)
  2. Rectangle
  3. Square
Mount Type
  1. Pendant
  2. Aircraft Cable
  3. Stem
  4. Surface
  5. Wall
  6. Recessed Flanged
  7. Recessed Trimless
  8. T-Bar
  9. Screw Slot
  10. Black & Silver Flanged Finish available
  1. 0-10V Dimming (1)
  2. ELV Dimming (1)
  3. Triac Dimming (1)
  4. Emergency Backup Battery (2)
  5. Damp Location Rated (2)
  6. 0-10V 5-Wire dimming is standard. Other options available. (1)
  7. Wet Location Rated
  8. Daylight Sensor
  9. Occupancy Sensor
  10. Daylight Harvesting (1)
  11. Outdoor
  12. 4' Adjustable Aircraft Cable is standard. Other cable lengths and stem options available.
  13. Wet Location Available
  14. TRIAC, ELV, MLV Remote Dimming (Standard)
  15. 0-10V Remote Dimming (Available upon request)

Outdoor Linear Recessed Lighting

UL Listed for Damp Locations

Luminaires that are “Suitable for Damp Locations” are approved for areas that are regularly exposed to moisture and condensation. These fixtures can safely handle limited amounts of moisture on, in, and around their electrical components. This rating also encompasses areas that are partially protected from water. However, it does not cover direct water contact.

Damp location listed LED lights are frequently used indoors for laundry rooms, over showers and bathtubs, utility rooms, unfinished basements, and similar areas. They can be used outdoors in areas that are protected, such as covered patios or porches, as these locations are usually not at risk of direct rain or snow exposure. These lights typically cost more than dry location lights because more advanced construction is required to meet the higher safety standards.

UL Listed for Wet Locations

Fixtures and lamps that are “Suitable for Wet Locations” can be installed anywhere that liquids might come in direct contact with the electronics. It could be a slow drip, a strong flow or anything in-between. They are typically used outdoors for things such as site lighting, wall packs, open-air decks, walkway lights, gazebos, signs, and holiday lights.